[Pgcluster-general] connecting to load balancer - help

[Sunitha S]

Hi All,



We have following setup



Tstmach1:

ClusterDB1

Replication server1

Load Balancer



Tstmach2

ClusterDB2

Replication server2



And the nodes are started in the following order

ClusterDBs on Tstmach1 and 2

Pgrelicates on Tstmach1 and 2

Pglb on Tstmach1

And log for pglb is as follows



2008-06-08 00:11:14 [30653]
DEBUG:PGRset_status_on_cluster_tbl():host:a3-cybertst1 port:5432 max:32
use:0 status1

2008-06-08 00:11:14 [30653]
DEBUG:PGRset_status_on_cluster_tbl():host:a3-cybertst5 port:5432 max:32
use:0 status1

2008-06-08 00:11:14 [30653] DEBUG:init_pglb():Child_Tbl size is[49536]



and the cluster works fine.



But How do connect to the load balancer and test fail scenarios with a
load balancer



Thanks in advance



Regards,

Sunitha S



This email message and its attachments may contain CONFIDENTIAL AND PRIVILEGED INFORMATION intended for the sole use of the addressee(s). If you have received it in error, please contact the sender by return email, notify your system manager and destroy the original message and any copies thereof. Any review, use, disclosure or distribution is unlawful. Please check this email and any attachments for the presence of viruses. The Company accepts no  liability for any damage caused by any virus transmitted by this email. The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company.
The Company reserves the right to monitor, review and store the content of all messages sent to or from this e-mail address.

www.aztecsoft.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://pgfoundry.org/pipermail/pgcluster-general/attachments/20080607/1a70b6e4/attachment.html